RME PAIR ARC-MIDI Interface Pro. StudioAudio Dial Remote READ DESCRIPTION PLZ

Description

THIIS BRC ONLY WORKS WITH ONLY CERTAIN TYPES OF  EQUIPMENT MOST ARE DISCONTINUED OR  OBSOLETE J‐JKS TYPR. Please check the cord connection...
It is not a USB! IT is COMPATIBLE TO  USB HOW? I DON'T Know.
But I did stay at a H.I.E. last night.
All INFORMATION COMES DIRECTLY FROM THE MANUFACTURER In Germany.
I Normally sell purses..not Remote Control (BRC).
BRC comes with the ADI8QS. It also works with the Fireface 802, UFX, UCX and the MADIface XT. The BRC provides a solid metal case with a main encoder dial, two push buttons and a 5 m (16 ft.) cable. The BRC connects to a special port on the back of the main unit.
Supported features The Basic Remote Control offers several functions to control the most important monitoring functions: -
0“Prog” button can be assigned to 17 different functions with 42 variants.
Among them are Talkback, Speaker B, Mono, Mute, External Input, Cue, recall of a mixer snapshot and many more.- DIM to a user adjustable value, by a push on the encoder -
Recall and store of a reference level for the main outputs, via the Recall button - Volume control of the monitoring outputs.
The controlled output is assigned in TotalMix FX, either Main or one of up to 4 Phones outputs are selectable. Supported features with ADI-8 QS converter The Basic Remote Control replaces the old RME Remote Control for the ADI-8 QS.
It controls the following functions of the ADI-8 QS: volume, store, recall.
RME BRC Blue Basic Remote Control Basic Pro Audio
These came out of a club in Florida and I will be totally transparent about any info to get these to the right person.
Dial Program and Recall.
Condition is "Used".
Shipped with USPS Priority Mail.
Feel Free to message me with any questions.
Thank you for shopping!
RedNet 5 is a 2U 32x32 Pro Tools | HD™ interface for any Dante™ audio-over-IP network, providing 32x32 I/O (16x16 at 192kHz). A pair of DigiLink connectors allows RedNet 5 to connect to any Pro Tools | HD system whether it's Native, HDX or even a legacy TDM system. Multiple RedNet 5 units can be on the same system to realise the the maximum channel count of Pro Tools, while Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.
- 32x32 Pro Tools | HD I/O for Dante audio-over-IP networks at up to 96kHz (16x16 at 192kHz)
- configurable to emulate an AVID 192 I/O or AVID HD I/O
- Primary and Expansion DigiLink connectionsUp to 24-bit, 192kHz sampling rates
- AES67 compliant
- Word Clock and Loop Sync I/O for increased flexibility and integration with other Pro Tools | HD hardware
- Comprehensive remote control and remote signal metering through RedNet Control
Updated to Brooklyn II chipset with latest RedNet firmware installed
Includes network, power and DigiLink cables (see photo)